Getting Started; Turning On The Pax-I3D Smart - VATECH PAX-i3D Smart Bedienungsanleitung

2 Getting Started

2 Getting Started
2.1
12

Turning on the PaX-i3D Smart

Do not position the patient in the unit while it is initiating.
The patient could be injured if the equipment malfunctions.
WARNING
- Condensation could form inside the equipment if it is
a different temperature than the surrounding room.
Only turn on the equipment once it has reached room
temperature.
- Wait at least 20 seconds after the equipment has been
CAUTION
turned off to turn it back on.
- Allow the equipment to warm up for at least 5 minutes
before acquiring images or preferably more than 30
minutes for image quality.
1. Turn the ON / OFF switch underneath the handle frame to the ON position.
License key
ON ( I )
2. Insert the license key for Ez3D plus
into the USB port on the back of PC.
The license key for Ez3D plus must
be attached to view or analyze the 3D
images.
PaX-i3D Smart(PHT-30LFO) User Manual
OFF (O)
ON ( I )