Herunterladen Inhalt Inhalt Diese Seite drucken

Releasing The Isofix And The Top Tether / Disassembly Of The Heyner - Heyner MultiRelax AERO Fix Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für MultiRelax AERO Fix:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

English
Bring together both belt tongues (C) of the harness belt
(G2) and connect them with the belt buckle (D) until a
<<click>> sound is clearly heard.
By tearing at the central adjustment belt (G5) make sure
that the harness belts (G2) lie fl at and tight against the
child's body and that they are not twisted.
In winters especially avoid thick clothing under the belt.
IMPORTANT:
Make sure that the belt strap of the three-point belt is
neither twisted nor jammed. Also check the lap belts.
They must not be twisted and should run as low as
possible across the hips of the child.
Please strictly follow the drawings and the installation
instructions. Should you have any questions, please
contact your dealer, the importer or the manufacturer.
1.4.2 Sitting and lying positions of the child
The HEYNER® child car seats are equipped with an ad-
aptation mechanism. The handling is simple and fast and
it is possible with only one hand.
By turning the position adjuster (PG) you move the
backrest (N) to the desired position.
29
1.5 Releasing the ISOFIX and the top tether /
Press
disassembly of the HEYNER®
Take care that the seat is not in the lying position.
Open
Relieve the top tether (TT) by pressing the unlock button
and relieve it from the anchorage point of the vehicle.
Lay the top tether (TT) across the child car seat.
In order to loosen the ISOFIX arms (IM), slightly press
the HEYNER® MultiRelax AERO Fix into the car seat
und and loosen the ISOFIX clips (IK) by pressing the
ISOFIX adjustment button (IE).
Now pull the whole seat forward until the ISOFIX arms
(IM) are
Pull
completely moved out and until you can see the green
marks.
Now you can press the ISOFIX release button (IT) at the
ISOFIX clips (IK), in order to release them from the ISOFIX
anchors (IA).
Pull the HEYNER® MultiRelax AERO Fix forward and
press again the ISOFIX adjustment buttons (IE), in order
to push both ISOFIX clips (IK) into the base part (BT) of
the seat.
English
GB
L+R
30

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis