Troubleshooting/Repairs - TRAK-IT TOOL W3-21FRH Betriebsanleitung

9. TROUBLE SHOOTING/REPAIRS
q The repairs shall be carried out only by the Powers authorised distributer.
w Removing Jammed Nail
● Remove the Fuel Cell and Battery.
WARNING:
e
The Battery cannot be charged.
While charging, the charger, AC
adapter and power cord are
heated, emit abnormal sound or
generate heat.
The pins cannot be driven.
Procedure
q Take out the nails from the inside of the Magazine.
w Remove nails that are jammed inside the Nose by using a punch or slotted screw
driver.
Phenomenon
・ The AC adapter's power plug is firmly connected to the
・ The AC adapter's jack is firmly inserted into the charger.
・ The Battery is properly set in the charger.
・ The charger's LED is turned on.
・ Stop using them immediately and consult your nearest
・ The tool body is properly loaded with the pins, Battery and
・ Check the LEDs of the tool body.
・ The gas still remains in the Fuel Cell.
・ The Fuel Cell is not out of life.
・ The battery capacity is still remaining.
・ The nails are not jamming.
・ The Contact Arm is properly pressed against the object.
24
Check Item
plug socket.
distributor.
Fuel Cell.