Safety Device - TRAK-IT TOOL W3-21FRH Betriebsanleitung

3. SAFETY DEVICES
The tool is provided with the following safety devices in order to secure safety for nail driving work.
Trigger
Contact Arm
● Prior to using the tool, be sure to inspect it to see whether the safety devices function
CAUTION:
properly. Do not use it if they do not function properly.
Prior to using the tool, check whether the safety devices function properly. With no nails
loaded, install the Battery and Fuel Cell to check.
※ In the following cases, the safety devices are out of order. Never use the tool.
1. An operating sound is emitted by simply pulling the trigger.
2. The tool starts dry-fire operation by simply applying the contact arm to the object.
※ A fan running sound is heard, this is OK.
If any abnormality is found, contact your nearest
inspection/repairing.
Mechanical Safety Device
This tool is to prevent discharge of nails unless the Contact Arm and Trigger have been
activated simultaneously. The nails are not discharged by neither simply pulling the
Trigger nor applying the Contact Arm to the nails driving object. The nails are
discharged only after applying the Contact Arm to the object and pulling the Trigger.
12
authorized distributor for