Leroy-Somer VARMECA 30 Inbetriebnahme Und Wartung Seite 46

LEROY-SOMER
1.5.2 - Standards (Emission)
The maximum emission level is set by the generic industrial (EN 50081-2) and residential (EN 50081-1) standards.
VARMECA 30 conforms to the following standards:
EN 50081-2, EN 61000-6-4 - EN 61800-3, IEC 61800-3.
Standard Description
EN 61800-3 Variable speed drive standards
EN 50081-1 Generic emission standards for
residential, commercial and light
EN61000-6-3
industrial environments
EN 50081-2 Generic emission standards for
the industrial environment
EN 61000-6-4
The second environment includes industrial networks supplied with low voltage but which do not serve buildings
for domestic use. Operation of a drive without an EMC filter in this type of environment may result in interference
on certain electronic appliances located near the drive whose immunity level might not be compatible with industrial
conditions. If it proves impossible to filter the disturbed element, add an external EMC filter.
44
INSTALLATION AND MAINTENANCE
VARMECA 30
Variable speed motor or geared motor
GENERAL INFORMATION
Second environment with
unrestricted distribution (DENR)
Second environment with
restricted distribution (DER)
First environment with
unrestricted distribution (R)
First environment with restricted
distribution (I)
A.C. supply
A.C. supply
Emission
Conformity conditions according to the
Application
VMA 31/32 ≤ 10kHz
VMA 33/34 ≤ 11kHz
VMA 31/32 ≤ 10kHz
VMA 33/34 ≤ 11kHz
VMA 31/32 ≤ 4kHz
VMA 33/34 ≤ 4,5kHz
VMA 31 ≤ 8kHz
VMA 32 ≤ 4kHz
VMA 33/34 ≤ 4,5kHz
3776 en - 07.2007 / h
switching frequency
With EMC filter
Internal External
VMA 31/32 ≤ 10kHz
VMA 33/34 ≤ 11kHz
VMA 31/32 ≤ 10kHz
VMA 33/34 ≤ 11kHz
VMA 31/32 ≤ 4kHz
-
VMA 33/34 ≤ 4,5kHz
VMA 31/32 ≤ 10kHz
VMA 33/34 ≤ 11kHz
VMA 31/32 ≤ 4kHz
-
VMA 33/34 ≤ 11kHz
VMA 31/32 ≤ 10kHz
VMA 33/34 ≤ 11kHz