EMS AIRFLOW PROPHYLAXIS MASTER Gebrauchsanweisung Seite 70

Water temperature and acoustic feedback settings
®
AIRFLOW and PIEZON
To adjust the water temperature or the acoustic feedback, follow the procedure below:
1. Turn the device ON.
2. Securely place both handpieces (AIRFLOW
3. Press +
groove below the numbers)
4. Colors will appear on the numbers:
•
0 to 4 for setting water temperature (5 is not used)
•
6 to 10 for setting acoustic feedback (5 is not used)
Water temperature Water temperature Water temperature Water temperature
0 1
No
25°
Heating
5. Change the settings according to your wish.
6. Press the ON/OFF button to save the setting and exit.
Note Note Note Note:
•
Changes are applied to both AIRFLOW
•
After a few seconds of keyboard inactivity, the device automatically exits the mode.
ENGLISH
®
liquids' temperature is 40°C by default.
simultaneously to access the menu. (See image below – place fingers in the
2 3
30° 35°
FB-618/EN – Rev. A-01 - 2017.03.30
® and PIEZON
4
6
No Low
40°
sound volume
® ®
and PIEZON liquid temperatures.
® ) back into their holders.
Acoustic feedback Acoustic feedback Acoustic feedback Acoustic feedback
8 9
7
Medium High
volume volume
10
Maximum
volume
20/46