Standard Accessories; Optional Accessories; Installation; Assembling The Accessories - Comet KSM 1450 Betriebs- Und Wartungsanleitung

fi«
CAUTION
• After removing the appliance from the packing materials, check that the identification label
and the warning labels are present and are legible. If this is not the case, contact your dealer
or an authorised service centre so they can be replaced.
• If the identification label and the warning labels deteriorate during use, contact your dealer
or an authorised service centre so they can be replaced.
3.2 S A
TANDARD CCESSORIES
Make sure that in the product package that was bought there are the following elements:
• high-pressure water cleaner (KSM);
• high-pressure delivery pipe with fast coupling (only CLASSIC);
• hose reel complete with high-pressure delivery pipe (only EXTRA);
• water gun;
• lance hose;
• rotating nozzle lance hose (only EXTRA);
• foaming lance;
• use and maintenance manual;
• guarantee certificate;
• accessory bag containing:
- nozzle cleaning pin,
- water suction hose-holding connector,
- water suction filter;
• bag containing (only EXTRA):
- lever for hose reel (3),
- water cleaner/hose reel connecting pipe (5),
- accessory support (8).
In case of problems, apply to the dealer or to an authorised service centre.
3.3 O A
PTIONAL CCESSORIES
The standard accessories for the high pressure cleaner can be integrated with the following vast
range of accessories:
• Sandblasting lance: designed for smoothing down surfaces, eliminating rust, paint, deposits etc.
• Pipe-draining probe: designed for unblocking pipes and ducts.
• Rotating water jet brush: designed for cleaning delicate surfaces.
• Fixed water jet brush: For cleaning delicate surfaces;
• Rotating nozzle lance hose (as standard on EXTRA): For removing strong dirtiness.
fi«
CAUTION
• The operation of the water cleaner may be impaired if unsuitable accessories are used and they
may even make it dangerous. Only use original accessories endorsed by the Manufacturer.
Refer to the documents provided with the optional accessories for information regarding their
general use, safety warnings, installation and maintenance.
4 I
NSTALLATION
4.1 A
SSEMBLING THE
a) Insert the lance hose (17) on the water gun (16) and tighten (operation A - Fig. 3).
b) Mount the accessory support (8) on the handlebar (30); mount the lever (3) on the hose reel (4)
(only EXTRA).
A
CCESSORIES
27