Operating The Device Safely - Dometic SMP 439A Montage- Und Bedienungsanleitung

SMP439A
•
Fasten the cables securely.
•
Do not expose the device to a heat source (such as direct
sunlight or heating). Avoid additional heating of the
device in this way.
A
NOTICE!
•
If cables have to be fed through metal walls or other walls
with sharp edges, use ducts or bushings to prevent
damage.
•
Do not lay cables which are loose or bent next to electri-
cally conductive material (metal).
•
Do not pull on the cables.
•
Do not lay the AC mains cable and the DC cable in the
same duct.
•
Set up the device in a dry location where it is protected
against splashing water.
•
Protect the device against corrosive fumes and salty or
moist air.
•
Protect the device and the cable against rain and moisture.
•
Store the device in a dry and cool place.
2.3

Operating the device safely

D
DANGER! Danger of electrocution
•
Do not touch exposed cables with your bare hands. This
applies especially when operating the device from the AC
mains.
•
To be able to disconnect the device quickly from the
mains, the socket must be close to the device and be easily
accessible.
!
WARNING!
•
Only use the device in closed, well-ventilated rooms.
EN
General safety instructions
9