Silvercrest SLL 10 A1 Bedienungsanleitung Seite 30

♦ Briefly press the
use as the left speaker . You will hear a beep and the TWS LED
flashes green rapidly during pairing .
♦ Press the button
♦ If the pairing of the two speakers has been successful, you will
hear a short beep . TWS mode is activated .
♦ The TWS LED
♦ The TWS LED
Pair the left speaker with a Bluetooth
♦
Start playback on the Bluetooth
♦
NOTE
► If you do not pair the two speakers within 6 minutes, the speakers
will turn off automatically . In this case, you will have to switch
the speakers back on again before restarting the pairing
process .
► Make sure you position the left and right speakers correctly for
playback .
► The playback buttons work on both speakers .
■ 20 │ GB │ IE │ NI
button on the first speaker that you want to
on the second speaker briefly .
on the left speaker lights up green .
on the right speaker flashes green .
® device .
® device .
SLL 10 A1