Troubleshooting - Silvercrest SLL 10 A1 Bedienungsanleitung

♦ If you are no longer using the speaker in AUX IN mode, remove
the 3 .5 mm jack cable
cover .
NOTE
► If you connect a 3 .5 mm jack cable to the speaker during the
playback of audio files via Bluetooth
automatically to the AUX input . The Bluetooth
also stopped if you connect a 3 .5 mm jack cable to the
speaker .
► In AUX IN mode, it is not possible to use the
button
► If the speaker stops receiving a signal while in AUX IN mode,
the speaker will switch off automatically after 10 minutes .

Troubleshooting

The speaker cannot be paired with a compatible Bluetooth
device
Make sure that the Bluetooth
♦
Bluetooth
jack cable
♦ Make sure that the speaker is switched on .
■ 24 │ GB │ IE │ NI
from the speaker and close the protective
to jump to the next/previous title .
® device . When a device is connected via a 3 .5 mm
, the Bluetooth
® , it will switch playback
® function is activated on the
® function is deactivated .
® connection is
button or
SLL 10 A1
®