Silvercrest SLL 10 A1 Bedienungsanleitung Seite 27

Start playback on the Bluetooth
♦
♦ Press and hold the
speaker off and deactivate the Bluetooth
You will hear a descending series of beeps .
The operating/charging LED
simultaneously and then goes out .
To connect further Bluetooth
♦ Switch on the speaker and press the button
speaker is in pairing mode and can be connected to another
Bluetooth device .
NOTE
► If you do not establish a connection between the speaker and
your Bluetooth
switch off automatically . In this case, you will have to switch the
speaker back on before restarting the pairing process .
If the speaker stops receiving a signal while in Bluetooth
►
mode, the speaker will switch off automatically after around
10 minutes .
SLL 10 A1
button for about 3 seconds to turn the
flashes blue and orange twice
® devices, proceed as follows:
® device within 3 minutes, the speaker will
® device .
® function .
. Now, the
GB │ IE │ NI
®
│ 17 ■