Anti-blocking function (ABS)
At the start of the lamination process, the pouch may be pulled in at an angle or
jam itself inside the appliance.
♦
Turn the anti-blocking switch
be drawn in.
♦
Remove the pouch and turn the anti-blocking switch
pouch thickness.
♦
Re-start the lamination process.
Cutting function
If you want to use the cutting function on the pouch guide rail
pouch guide rail
♦
If necessary, fold in the document supports
♦
Attach the cutting attachment
pouch guide rail
another flat surface.
♦
Push the cutting head
pushed to both ends of the cutting rail
♦
Flip up the cutting rail
documents on the pouch guide rail
the pouch format guide
document.
♦
Use the markings on the scale table to align your document precisely.
♦
Flip the cutting rail
♦
Hold the paper firmly in place with one hand.
♦
To cut, press the cutting head
over the document in a single movement.
ULG 300 B1
to the position ABS. The pouch will no longer
.
so that it creates a flat surface with the
. To do this, place the pouch guide rail
as far as the stop (the cutting head
up using the rounded handle and position the
together until it is touching both sides of the
down so it clicks into place.
downwards with the other hand and push it
back to the desired
, take off the
.
).
. Fix the document in place by pushing
GB │ IE │ NI
on a table or
can be
│
11
■