Overheating Protection; Safety Information - UNITED OFFICE ULG 300 B1 Bedienungsanleitung

Lamination times
Pouch
size
DIN A4
DIN A3

Overheating protection

This appliance is fitted with overheating protection.
If the motor overheats due to overloading, the appliance switches itself off auto-
matically. In this case, disconnect the power cable and wait until the appliance
has cooled down to room temperature. You can then reconnect the plug to a
mains power socket and take the appliance back into use.
We recommend that you let the appliance cool down for about 30 minutes after
2 hours of operation.

Safety information

Check the appliance for visible external damage before use.
■
Never operate an appliance that is damaged. There is a
risk of electrocution.
All repairs must be carried out by authorised specialist
■
companies or by the customer service department. Improp-
er repairs can pose significant risks to the user. It will also
invalidate any warranty claims.
To avoid risks, arrange for a defective power cable to be re-
■
placed by qualified technicians or by our Customer Service
Department.
NEVER use the appliance with a defective power cable.
■
There is a risk of electrocution.
Do not use extension cables or power socket strips that do
■
not meet the required safety standards.
The mains power socket must be easily accessible, so that
■
the power cable can be easily disconnected in the event of
an emergency.
│ GB │ IE │ NI
■ 4
Pouch thickness switch
position: 80 μm
approx. 54 s
approx. 75 s
Pouch thickness switch
position: 125 μm
approx. 76 s
approx. 105 s
ULG 300 B1