Operating Instructions - SKF THAP 150E Bedienungsanleitung

4. Operating instructions

6
1
1 Air connection
2 Oil inlet
3 Oil return
4 Connection nipple (nose piece size G
• Connect the air-driven pump or oil injector to the workpiece. The connection can
be made directly or via a flexible pressure hose (for THAP 030E and THAP 150E),
or high pressure pipe (for THAP 300E and THAP 400E).
Remove the G /
3
flexible pressure hose.
• THAP 030E and 150E: Fit a G
maximum tightening torque of 130 Nm (96 lbf-ft). Connect the flexible pressure
hose (729834) to the adapter nipple. The flexible pressure hose can be connected to
the application using an appropriate quick connector coupling and nipple.
• THAP 300E and THAP 400E: Fit a high pressure pipe with a G
(e.g. 227957 A) to the hydraulic outlet block. The maximum tightening torque is
SKF THAP 030E 150E 300E 400E
7
/
3
nose piece (4) to enable connection of a high-pressure pipe or
4
/ to G
3
4
2
5 Release valve
6 Air valve
7 Carrying handle
)
4
/ adapter nipple (228027 E), with a
1
4
5
4
3
/ end
3
4
9