Herunterladen Inhalt Inhalt Diese Seite drucken

Section 4: Installation; Unpacking; Power On: Initial Checkout Procedure - Medtronic ACT Plus Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für ACT Plus:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 155

Section 4: Installation

Unpacking

1. The ACT Plus
Operator's manual
Power cord
Temperature verification cartridge
Point of care quick start envelope
Quick reference guide
Actuator assembly cleaning kit
USB storage device
2. Check the box for damage, and report any damage to the carrier.
3. Remove the protective bag.
4. Set the ACT Plus
5. Check the ACT Plus
6. Retain all shipping materials.

Power ON: Initial Checkout Procedure

1. Connect the power cord to an AC power source with the same voltage rating
that is listed on the serial plate located on the bottom of the ACT Plus
instrument.
2. Rotate the actuator heat block to the closed position.
3. [Optional] Attach the optional bar code scanner.
4. Turn the power switch, located on the rear panel, to the ON position. The
actuator heat block should rotate to the open position, followed by
illumination of all clotting time display segments, with the LCD indicating
"Self-Test Pass." An audible tone indicating the end of the self-test should
accompany this sequence. The version of the ACT Plus
during this step.
5. From the Main Menu, select [Cartridge Lot]. Scan the bar code label on the
cartridge package. The cartridge lot number and expiration date should be
entered in the appropriate cartridge-type fields.
Note: For manual data entry, refer to Section 6, Data Entry. For data entry
using the bar code scanner, refer to Appendix A or Appendix B.
Note: The lot number and expiration date must be entered before a cartridge
is used; if no bar code scanner is used, see Section 6, Data Entry, for detailed
instructions.
6. From the Main Menu, select [Cartridge Type]. Select the cartridge type
entered in Step 5, and press Enter.
7. Insert an empty cartridge into the actuator heat block.
®
ACT Plus
Operator's Manual
®
instrument is shipped with the following items:
®
instrument on a level surface.
®
instrument for visible damage.
®
®
software will display
English 19

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis