hanseatic MC-IF7042B2 Gebrauchsanleitung Seite 47

doing so, protect hands from burns with
oven gloves or pot holders.
• Once the hob has cooled down, you can
remove stubborn dirt by using a specially
made, commercially available detergent.
• Treat the hob with a special care product
after cleaning.
Something has boiled over on the
sensors
1. Switch the hob off.
2. Wipe the material that has boiled over us-
ing a soft rag.
3. Wipe the sensor surface with a slightly
damp cloth.
4. Wipe the sensor surface completely dry
with a paper towel.
5. Switch the hob back on.
If the sensors are dirty, e.g. if something
has boiled over, the hob may turn itself
off. You will hear a signal tone. If the
sensors are dirty or damp, they may not work.
Cleaning the hob Page EN-19