Setting The Time - AEG DDLE ÖKO TD 27 Bedienung Und Installation

4.2.6 Switching Wellness comfort function on/off
4.2.7 Switching automatic water volume control on/off; setting
4.2.8 Selecting second line of display
Set consumption indicator "Energy consumption and water volume" to zero.

4.2.9 Setting the time

4.2.10 Remote temperature control - scan / - log on / - log off
Remote temperature control - scan at appliance
Remote temperature control - log on to appliance
Remote temperature control - log off appliance
»
Press ECO for three seconds.
»
Briefly press ECO several times.
»
Select "OFF" / "ON".
»
Press ECO for three seconds.
»
Press the ECO button briefly several times.
»
Select "OFF" / "ON".
»
For "ON setting", briefly press the ECO button.
»
Water volume setting 5 ... 200 l.
»
Press ECO for three seconds.
»
Briefly press ECO several times.
»
Select display value of second line:
l/min Flow rate
kWh Energy consumption
m³ Amount of water
Time Time
»
Press buttons 1 and 2 in the INFO menu simultane-
ously when the corresponding consumption value is
shown on the display.
»
Press ECO for three seconds.
»
Briefly press ECO several times.
»
Select the time.
»
Press ECO for three seconds.
»
Briefly press ECO several times.
»
Press ECO for three seconds.
»
Briefly press ECO several times.
»
Press button 1; Self-learning phase is enabled.
»
Press any button on the remote temperature con-
trol.
»
Press ECO for three seconds.
»
Briefly press ECO several times.
»
Press button 2 in "rc" mode.
38 °C
OFF
switched
OFF: .
switched
ON: .
38 °C
OFF
switched
OFF: .
switched
ON: .
80 l
For example 150 l.
38 °C
Selected display.
0
38 °C
For example 12:15
Note:
Reset the time after a power interruption.
38 °C
rc 1 ... 4
Number of remote temperature controls logged on (rc:
remote control).
38 °C
rc 1
Bar graph is shown.
Green LED flashes.
rc 2
Bar graph display goes off.
Remote temperature control detected.
38 °C
rc 2
rc 0: All remote temperature controls logged off.
Operation
27