Settings In The Info Menu - AEG DDLE ÖKO TD 27 Bedienung Und Installation

Operation
4.1.3 Calling up memory buttons
4.1.4 Selecting / deselecting ECO

4.2 Settings in the INFO menu

Accessing the menu
Operation
All settings in the INFO menu are immediately accepted.
Exiting the menu
If no button is pressed for approx. 40 seconds, the INFO menu is exited.
4.2.1 Setting the ECO temperature
4.2.2 Setting the ECO flow rate
4.2.3 Setting the brightness of blue and red backlighting
4.2.4 Switching orientation light on/off
4.2.5 Switching childproofing on/off; setting
26
»
Hold down button 1 or 2.
»
Press ECO: Selecting ECO
»
Press ECO: Deselecting ECO
»
Press ECO for three seconds.
»
Press ECO for three seconds.
»
Press the ECO button for three seconds.
»
Temperature setting, 30 ... 60 °C.
»
Press ECO for three seconds.
»
Briefly press ECO.
»
Set flow rate 4 ... 15 l/min.
»
Press ECO for three seconds.
»
Briefly press ECO several times.
»
Select the brightness for blue and red.
»
Press ECO for three seconds.
»
Briefly press ECO several times.
»
Select "OFF" / "ON".
»
Press ECO for three seconds.
»
Briefly press ECO several times.
»
Select "OFF" / "ON".
»
Briefly press ECO.
»
Set the temperature.
For example 38 °C and 43 °C.
, green LED illuminates.
No , LED does not light up.
Display indication: Appliance as factory-set
38 °C
Selected settings.
38 °C
For example 40 °C.
38 °C
8.0 l/min
For example 6.0 l/min.
38 °C
Blue
Red
100 %
20 %
38 °C
OFF
switched
OFF: .
switched
ON: .
38 °C
OFF
switched
OFF: .
switched
ON: .
43 °C
For example 36 °C.