Inhaltsverzeichnis
Werbung
English
z Changing display mode
(1) During Single display in SD Mode, make sure that the OSD is not displayed, and then
press the [
control to change the display from Single display to 4x4 display.
(2) Press the [
the remote control to move the image selection cursor.
(3) Press the [
control to display the image selected with the image selection cursor in Single display.
„ Deleting, locking, and unlocking images
(1) Make sure that the OSD is not displayed, and then press the [
front panel or on the remote control. The output image changes to SD mode, and the
images stored on the SD card are displayed as single images. When you want to work
in 4x4 display, press the [
remote control to change to 4x4 display.
(2) Use the [
delete.
In Single display, the image you want to delete is displayed. In 4x4 display, use the
image selection cursor to select the image you want to delete.
(3) Press the [MENU] button on the operating panel to display the SD Mode OSD menu.
z Deleting images
From the OSD menu, select [SD] → [Delete].
To delete the image currently selected, select [Current]. To delete all images, select [All].
z Locking images
From the OSD menu, select [SD] → [Lock].
To lock the image currently selected, select [Current]. To lock all images, select [All].
z Unlocking images
From the OSD menu, select [SD] → [Unlock].
To unlock the image currently selected, select [Current]. To unlock all images, select [All].
106
] button on the operating panel or the [AF
] and [
] buttons on the operating panel or the [ ] and [ ] buttons on
] button on the operating panel or the [AF
] button on the operating panel or the [AF
] / [
] buttons on the operating panel to select the image you want to
] button on the remote
] button on the remote
] button on the
] button on the
Werbung
Inhaltsverzeichnis
