Inhaltsverzeichnis
Werbung
„ Saving the image
(1) Press the [
] button on the operating panel or the [
switch the output image to the camera image.
(2) Make sure that the OSD is not displayed, and then press the [
operating panel or on the remote control.
(3) Saving begins when the [
the symbol disappears.
N o t e
• Only optically zoomed images may be saved, digitally zoomed images will revert back
the maximum optical zoom prior to saving.
• Saved images will not be Time/Date stamped.
• Please confirm images are saved correctly to the SD card or PC.
ELMO is not liable for lost images or failure to capture images.
• The [
] mark is only displayed on the screen when [Function Setting] → [Guide] is set
to ON from the Camera OSD menu.
• When the SD card is write-protected, images cannot be saved in the SD card.
• If the SD card is full when recording, an [
any unnecessary images or use another SD card.
• Never remove the SD card while it is reading or writing data. This may cause
malfunctions to occur.
• Do not turn off the power to this product while the SD card is reading or writing data.
This may cause malfunctions to occur.
„ Displaying the image
There are two display modes for SD images. You can use Single display to display one
image only, or 4x4 display to display 16 images.
z Single display
(1) Make sure that the OSD is not displayed, and then press the [
operating panel or on the remote control. The output image changes to SD mode, and
the images stored on the SD card are displayed as single images.
(2) Make sure that the OSD is not displayed, and then press the [
operating panel or the [ ] button on the remote control to change to the next image.
Press the [
] button on the operating panel or the [ ] button on the remote control
to return to the previous image.
(3) You can zoom in or out of the image being displayed by using the zoom dial on the
main unit, and you can reset zoom in/out by using the AF button on the main unit.
N o t e
• When an SD image is enlarged, the Scroll function cannot be used. If you want to use
the Scroll function, press the AF button to reset the image enlargement, and then scroll.
] mark is displayed on the screen. Saving is complete when
] mark is displayed on the screen. Delete
English
] button on the remote control to
] button on the
] button on the
] button on the
105
Werbung
Inhaltsverzeichnis
