Inhaltsverzeichnis
Werbung
Mask Function
You can mask a section of the output image.
„ Mask settings
From the Camera Mode OSD Menu, select [Function Setting] → [Mask]. The level bar to set
[Darkness] is displayed, and you can then set the darkness for the masked areas with the
[
] and [
] buttons on the operating panel.
„ Mask operations
When you press the [
Image or SD Mode, the mask display uses the darkness set previously.
You can move the masked area using the [ ], [ ], [ ]. and [ ] buttons on the remote
control.
The mask display is cleared when you press the [
N o t e
• The mask function cannot be used when the output image is PC.
• In the optical zoom range, the mask size remains the same. In the digital zoom range,
the mask size expands and contracts depending on the magnification ratio.
• Cannot mask the entire output image.
] button on the remote control while the output image is Camera
English
] button on the remote control again.
125
Werbung
Inhaltsverzeichnis
