Inhaltsverzeichnis
Werbung
English
Adjusting the Brightness
Press the [BRIGHTNESS
[BRIGHTNESS
operating panel or on the remote
control to adjust image brightness.
The following two adjustment modes
can be set by selecting [Brightness]
from the OSD menu.
„ Automatic brightness adjustment
([Brightness] → [Auto] in the OSD)
The brightness of the image changes automatically
according to the brightness of the object.
„ Manual brightness adjustment
([Brightness] → [Manual] in the OSD)
The brightness of the image is fixed to the specified level.
N o t e
• Factory setting is set to [Auto].
• Manual adjustment fixes the brightness and does not adjust to changes in brightness of
the object.
• By setting [Guide] to [On] in the OSD menu, the setting details are displayed on the screen.
• To go back to the factory settings, press the [BRIGHTNESS
buttons on the front panel at the same time, or set [Reset Brightness] from the OSD menu.
• In places where the object is exposed to bright sunlight (e.g.
near a window), or extremely bright lights, the brightness
of the screen may not dim sufficiently, even when the
[BRIGHTNESS
In such cases, adjust the amount of light by closing the
curtains or moving the source of the light.
118
] or
] button on the
] button is pressed.
Auto
> Manual
] and [BRIGHTNESS
]
Werbung
Inhaltsverzeichnis
