Inhaltsverzeichnis
Werbung
(3) Connecting to the unit with analog RGB input terminal equipped
Connect the supplied analog RGB cable to the [RGB OUT] terminal on the rear panel.
• The display position may be displaced from the center of the screen. In such a case,
adjust the horizontal and vertical positions manually from the connected device.
• Vertical stripes may appear on the projector or PC monitor screen. This can be mitigated
by manually adjusting the dot clock from the connected device of the unit with analog
RGB output terminal equipped.
(4) Connecting to the unit with analog RGB output terminal equipped
Connect the supplied or commercially-available analog RGB cable to the [RGB IN] terminal
on the rear panel.
N o t e
• When using a laptop PC with external output mode switching, set the laptop PC side
to the external output mode after pushing the manual operation button [PC] of this
equipment.
„ Specifications of the analog RGB input terminal of this product
Signal allocation
5
4
3
2
1
10
9
8
7
15 14 13
12 11
DSUB 15P shrink terminal (Female)
Pin assignment
Pin No.
Name
1
Video signal
(Red)
2
Video signal
(Green)
3
Video signal
(Blue)
4
N.C
5
GND
(5) Connecting to the unit with a composite video input terminal equipped
Connect an RCA pin plug video cable to the [VIDEO OUT] terminal on the rear panel.
(6) Connecting the desktop recorder
Connect the optional desktop recorder to the main unit with a dedicated cable.
(7) Connecting the AC adapter
Connect the DC plug of the supplied AC adapter to the [DC IN 12V] terminal on the rear
panel before inserting the AC adapter in an outlet.
Video signal: Analog 0.7V (p-p) with 75
Horizontal synchronized signal: TTL level (Positive/negative polarity)
6
Vertical synchronized signal: TTL level (Positive/negative polarity)
Pin No.
6
7
8
9
10
11
12
English
terminated
Name
Pin No.
GND (Red)
13
GND (Green)
GND (Blue)
N.C
14
GND
GND
15
N.C
Name
Horizontal
synchronized
signal
Vertical
synchronized
signal
N.C
99
Werbung
Inhaltsverzeichnis
