Connecting The Ac Adapter And Video Cable - Elmo P10 Bedienungsanleitung

English

Connecting the AC Adapter and Video Cable

(1) USB terminal
SD card
· To PC
(2) DVI OUT terminal
· To projector
· To PC monitor
N o t e
• To protect the unit and connected peripheral devices, turn off all devices.
• When plugging in or unplugging the connector cable, hold the plug of the cable.
(1) Connecting to the PC with a USB cable
Connect the USB cable to the [USB] terminal on the side panel.
N o t e
• We recommend using a USB 2.0 compliant USB cable.
• If you plug into a USB connector with the power on, the PC may not recognize this
device.
• Depending on the USB environment used by the PC or peripheral equipment using the
USB 2.0 compliant cable, image transfer may be disrupted.
• Operation is not guaranteed for all environments.
(2) Connecting to the unit with a DVI input terminal equipped
Connect the supplied DVI cable to the [DVI OUT] terminal on the rear panel.
98
(4) RGB IN terminal
· To PC
(5) VIDEO OUT terminal
(3) RGB OUT terminal
· To projector
· To PC monitor
(7) DC IN 12V terminal
· To power plug
(6) RECORDER terminal
· To desktop recorder
(sold separately)
· To monitor
(8) DC OUT terminal
· To optional
accessories