Explanation Of Symbols On Unit - Gima 32918 Gebrauchsanweisung

31
5. If you do not use the monitor for a long time, please remove the
batteries. 6. It is recommended the performance should be checked
every 2 years
7. Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after
moistened with water, diluted disinfectant alcohol, or diluted
detergent. 8. no component can be maintained by user in the monitor. the
circuit diagrams, component part lists, descriptions, calibration
instructions, or other information which will assist the user's appropriately
qualified technical personnel to repair those parts of equipment which
are designated repairably can be supplied.
9. the monitor can maintain the safety and performance
characteristics
three years, and the cuff can
characteristics for a minimum of 1000
10. It is recommended the cuff should be disinfected 2 times
every week if needed (for example, in hospital or in clinique). Wipe the
inner side (the side contacts skin) of the cuff by a soft cloth squeezed
after moistened with ethyl alcohol (75-90%), then dry the cuff by
airing.

explanatIon of symbols on unIt

symbol for "the operatIon guIde must be read"
(the sign background colour: blue.the sign graphical symbol:
white) symbol for "WarnIng"
symbol for "type bf applIed parts"
(the cuff is type bf applied part)
symbol for "envIronment proteCtIon - Waste electrical
products should not be disposed of with household waste.
please recycle where facilities exist. Check with your local
or retailer for recycling advice".
authority
symbol for "manufaCturer"
symbol for "CompIles WIth mdd93/42/eeC reQuIrements"
0197
symbol for "date of manufaCture"
symbol for "european representatIon" sn
symbol for "serIal number"
"Keep dry"
or after repair. please contact the service center.
for a minimum of 10,000 measurements or
maintain the performance
measurements.
symbol for
ENGLISH