Explanation Of Symbols On Unit - Gima KD-558 Gebrauchsanweisung

5. If you do not use the monitor for a long time, please remove the batteries.
6. It is recommended the performance should be checked every 2 years
or after repair. Please contact the service center.
7. Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after
moistened with water, diluted disinfectant alcohol, or diluted detergent.
8. No component can be maintained by user in the monitor. The circuit
diagrams, component part lists, descriptions, calibration instructions,
or other information which will assist the user's appropriately qualified
technical personnel to repair those parts of equipment which
are designated repairably can be supplied.
9. The monitor can maintain the safety and performance characteristics
for a minimum of 10,000 measurements or three years, and the cuff can
maintain the performance characteristics for a minimum of 1000
measurements.
10. It is recommended the cuff should be disinfected 2 times every week
if needed (For example, in hospital or in clinique). Wipe the inner side
(the side contacts skin) of the cuff by a soft cloth squeezed after
moistened with Ethyl alcohol (75-90%), then dry the cuff by airing.

EXPLANATION OF SYMBOLS ON UNIT

Symbol for" THE OPERATION GUIDE MUST BE READ"
z
(The sign background colour: blue.The sign graphical symbol: white).
Symbol for "WARNING".
Σ
Symbol for "TYPE BF APPLIED PARTS" (The cuff is type BF applied part).
IVD
1
Symbol for "ENVIRONMENT PROTECTION - Waste electrical products
PHTHALATES
should not be disposed of with household waste. Please recycle
where facilities exist. Check with your local Authority or retailer
for recycling advice".
Symbol for "MANUFACTURER".
0197
Symbol for "DATE OF MANUFACTURE".
Symbol for "EUROPEAN REPRESENTATIVE".
SN Symbol for "SERIAL NUMBER".
z
Symbol for "KEEP DRY".
Symbol for "KEEP AWAY FROM SUNLIGHT".
Σ
1
ENGLISH
Symbol for "COMPILES WITH MDD93/42/EEC REQUIREMENTS".
36