Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance; Explanation Of Symbols On Unit - Gima KD-735 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für KD-735:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 93

MAINTENANCE

z
z
1.
Do not drop this monitor or subject it to strong impact.
2.
Avoid high temperature and solarization. Do not immerse the monitor
Σ
IVD
1
in water as this will result in damage to the monitor.
Σ
IVD
1
3. If this monitor is stored near freezing, allow it to acclimate to room
PHTHALATES
z
temperature before use.
PHTHALATES
4.
Do not attempt to disassemble this monitor.
5. If you do not use the monitor for a long time, please remove the batteries.
Σ
IVD
1
6. It is recommended the performance should be checked every 2 years
or after repair. Please contact the service center.
PHTHALATES
7. Clean the monitor with a dry, soft cloth or a soft cloth squeezed well after
moistened with water, diluted disinfectant alcohol, or diluted detergent.
8. No component can be maintained by user in the monitor. The circuit
diagrams, component part lists, descriptions, calibration instructions,
or other information which will assist the user's appropriately qualified
technical personnel to repair those parts of equipment which are
designated repairably can be supplied.
9. The monitor can maintain the safety and performance characteristics
for a minimum of 10,000 measurements or three years, and the cuff can
maintain the performance characteristics for a minimum of 1000
measurements.
10. It is recommended the cuff should be disinfected 2 times every week
if needed (For example, in hospital or in clinique). Wipe the inner side
(the side contacts skin) of the cuff by a soft cloth squeezed after
moistened with Ethyl alcohol (75-90%), then dry the cuff by airing.

EXPLANATION OF SYMBOLS ON UNIT

z
Symbol for "THE OPERATION GUIDE MUST BE READ"
(The sign background colour: blue.The sign graphical symbol: white)
Symbol for "WARNING"
Symbol for "TYPE BF APPLIED PARTS"
(The cuff is type BF applied part)
Symbol for "ENVIRONMENT PROTECTION - Waste electrical
products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local Authority
or retailer for recycling advice".
Symbol for "MANUFACTURER"
Symbol for "COMPILES WITH MDD93/42/EEC REQUIREMENTS"
0197
Symbol for "DATE OF MANUFACTURE"
Symbol for "EUROPEAN REPRESENTATION"
ENGLISH
32

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis