Clock And Date Adjustment - Gima 32918 Gebrauchsanweisung

25
When lCd shows battery symbol
batteries with new ones. rechargeable batteries are not
suitable for this monitor.
remove the batteries if the monitor will not be used for a
month or more to avoid relevant damage of battery
leakage.
avoid the battery fluid to get in your eyes. If it should
get in your eyes, immediately rinse with plenty of
clean water and contact a physician.
the monitor, the batteries and the cuff, must be disposed of
according to local regulations at the end of their usage.

2. clock and date adjustment

a. once you install the battery or turn off the monitor, it will enter Clock mode,
and lCd will display time and date by turns. see picture 2&2-1.1
picture 2
b. While the monitor is in Clock mode, pressing both the "start" and "mem"
button simultaneously, a beep is heard and the month will blink at first. see
picture 2-2. press the button "start" repeatedly, the day, hour and minute
will blink in turn. While the number is blinking, press the button "mem" to
increase the number. Keep on pressing the button "mem", the number will
increase fast.
c. you can turn off the monitor by pressing "start" button when the minute is
blinking, then the time and date is confirmed.
d. the monitor will turn off automatically after 1 minute of no operation, with
the time and date unchanged.
e. once you change the batteries, you should readjust the time and date.
, replace all
picture 2-1 picture 2-2
ENGLISH
b attery