Auto Pump Speed Mode - With Purge/Vent Device Accessory Only - Agilent Technologies TwisTorr Medium-TMP Bedienungshandbuch

17 Technical Information
Connection J1 Remote I/O Interconnections
NOTE:
there are some limitations.
See the description in the
body of the text for details.
Figure 18
Auto Pump Speed Mode – with Purge/Vent Device
Accessory Only
If WIN 125 = 2 the both the valves are managed by an automatic
procedure.
When activated, this procedure guarantees that the pump is slowed
down properly modulating in automated way the Vent Valve (see the
figure above for details).
The vent could damage the pump. Please, use the "Auto Pump Speed" mode or
CAUTION!
refer to Agilent personnel.
226/284 TwisTorr Medium-TMP Rack Controller User Manual / 87-901-049-01