On Command Mode - With Purge/Vent Device Accessory Only; Autotime Mode - With Purge/Vent Device Accessory Only; Controlled Venting - Agilent Technologies TwisTorr Medium-TMP Bedienungshandbuch

On Command Mode – with Purge/Vent Device
Accessory Only
If WIN 125 = 1 the vent valves can be operated manually via serial
communication (or by front panel interface) with the followings
limitations.
Setting WIN 122 = 1 the Vent Valve opens only if the pump is in STOP
status: if the pump is in STARTING, NORMAL or AUTOTUNING
status the valve stays close; if the pump is in BRAKING status, the
Vent Valve performs a Controlled Venting.
Setting WIN 122 = 0 the Vent Valve is closed independently from the
pump status.
Autotime Mode – with Purge/Vent Device
Accessory Only
The default setting for vent operating mode is "Autotime" (Win 125 = 0).If
WIN 125 = 0 the Vent and Purge Valves are opened as a function of time (see
the figure below for details). The timings are configurable through WIN 126
(Vent Valve Opening Delay) and WIN 147 (Vent Valve Opening Time).
TwisTorr Medium-TMP Rack Controller User Manual / 87-901-049-01
Connection J1 Remote I/O Interconnections
Technical Information
227/284
17