Operating Components; Assembly (Figure B) - Parkside PAS 500 C2 Bedienungsanleitung

Operating components

GB
Mains power cable
Accessory storage
2
3
Viewing window for blockage indicator
4 Bracket
5 Container lid
6 On/Off switch
7
Hose connection
8
Closure clips
9
Carrying handle
10 Metal container
Suction hose
11
12 Suction pipe
13 HEPA Filter
14 Wire fi lter basket
15 Air fi lter
16 Filter housing
17 Safety switch for HEPA fi lter
18 Safety switch for wire fi lter basket
19 Metal brackets

Assembly (Figure B)

8
DANGER
► Before working on the appliance, disconnect the plug. Otherwise, there will
be the risk of a fatal electrical shock.
NOTICE
► This appliance is equipped with 2 safety switches, which permit it to operate
only with a correctly fi tted HEPA fi lter and wire fi lter basket.
♦ Check the correct and fi rm seating of the HEPA fi lter
basket 14 .
♦ Place the container lid
closure clips 8 .
♦ Connect the suction hose
(with the printed symbol
screw it tight (bayonet lock).
5
on the metal container
11 . To do this, insert the rotating plastic end piece
) into the hose connection
13 and the wire fi lter
10 and secure it with the
7 and
PAS 500 C2