De Dietrich DTI1102 series Einbau- Und Gebrauchsanweisung Seite 37

2 2 / / INSTALLING YOUR APPLIANCE
•
INSTALLING YOUR HOB ABOVE
A DRAWER, A CUPBOARD OR
AN OVEN
(continued)
— Above an oven (Fig. 01)
The oven must be low mounted. At the front
there must be a 0.5 cm opening around the
width of the cabinet and an air inlet of 30 cm
minimum at the back of the unit. If the oven
is not fitted with a ventilation system with an
air outlet at the front, you must use an
insulation kit between the oven and the hob
(to be ordered from the distributor).
If the oven has a "pyrolysis" function,
use the cooking hob during pyrolysis.
Min. 0.5 cm gap along the whole
width of the hob.
Fig. 01
2
NEVER
Min. opening
Ouverture min.
100 cm²
100 cm
2
37
6 cm
1
3
Circulation d'air ambiant
Circulation of ambient air
Circulation d'air chaud
Circulation of hot air
EN
Cut out 30 cm²
Découpe de
2
to the right
30 cm à droite
and/or left.
et/ou à gauche