SUOMY MX TOURER Handbuch Seite 21

All the Suomy products are constantly subject to a continual improvement process, that's why Suomy reserves the right to make changes, without
prior notice, to the products object of this manual. It is therefore not possible to exercise any rights on the basis of the information, illustrations
and descriptions contained in this manual.
MX TOURER was developed and tested to assure, together with the safety features, the best level of comfort and noise reduction during
ordinary conditions of use. However, the particular configuration of the vehicle and/or the position of the rider or both factors can entail situations
that could not be foreseen during the manufacturing of the product that may generate aerodynamic rustles or hissing sounds.
Suomy therefore, cannot be held responsible if this should occur.
FEATURES
• Possibility of use in both the endure version with a peak, as well as the full version
• Total removability of pads and the inner cap made of high quality hypoallergenic fabric with antibacterial treatment.
• Neckroll made of synthetic leather.
• All parts in contact with the face are easy to wash.
• Assembly and disassembly of the inner visor mechanism with quick bayonet.
• Inner sun visor
The Suomy MX TOURER is certified (P) for use in both visor and full versions. This feature allows you to use the helmet in all configurations
in full compliance with current safety standards.
To ensure adequate protection, MX TOURER must fit properly and be
firmly fastened, so that it cannot be taken off either by pulling or by
turning it on your head (see Figure 1). If it is too large it can drop down
to cover your eyes or turn sideways while riding, thus preventing proper
visibility.
FEATURES
Eng
figure 1
19