Inhaltsverzeichnis
Werbung
BIOS Setup
4-6. Power Management Setup Menu
This menu sets up the power management in order to reduce power consumption.
ACPI Suspend Type
This item specifies the power saving mode for ACPI (Advanced Configuration and Power
Interface). The options are: S1(POS), S3(STR), S1 & S3.
•
S1 (POS): Enables the function of Power On Suspend.
•
S3 (STR): Enables the function of Suspend to RAM.
Run VGABIOS if S3 Resume:
This item decides to run the VGABIOS or not if the S3 status resumes.
USB Dev Wake-Up From S3
This item allows you to use a USB device to wake up a system that is in the S3 (STR) state.
Modem Use IRQ:
You can specify the IRQ for modem use. Eight options are available: NA $ 3 $ 4 $ 5 $ 7
$ 9 $ 10 $ 11. The default setting is NA.
Soft-Off by PBTN
Two options are available: Instant-off and Delay 4 Sec.. The default setting is Instant-off.
Pressing the power button for more than four seconds forces the system to enter the Soft-Off
state when the system has "hung".
Figure 4-8. Power Management Setup Menu
4-17
User's Manual
Werbung
Inhaltsverzeichnis
