Herunterladen Inhalt Inhalt Diese Seite drucken

Installation - Agilent Technologies Turbo-V 850 TwisTorr Bedienungshandbuch

Inhaltsverzeichnis

Werbung

16
Instructions for Use

Installation

Installation

Do not remove the bolted cap before connecting the tur-bopump to the system.
CAUTION!
Figure 2
Install this device only in indoors ambient and in any case don't use
in an environment exposed to atmospheric agents (rain, snow, ice),
dust, aggressive gases or in explosive environments or those with a
high fire risk.
During operation, the following environmental conditions must be
respected:
In the presence of magnetic fields the pump must be protected using
a ferromagnetic shield. See the appendix "Technical Information" for
detailed information.
The Turbo-V 750/850 TwisTorr Pumping System must be connected
to a primary pump (see "Technical Information").
294/406
maximum pressure: 2 bar above atmospheric pressure
air temperature: from +5 °C to +45 °C
relative humidity: 0 – 90 % (non-condensing)
Turbo-V 750/850 TwisTorr User Manual / 87-901-020-01
(A)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis