Parkside PHA 12 A1 Originalbetriebsanleitung Seite 9

maged parts repaired be-
fore using thepower tool.
Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp
and clean. Carefully main-
tained cutting tools with sharp
cutting edges are less likely to
get jammed and are easier to
work with.
g) Use the power tool, ac-
cessories etc. in accordan-
ce with these operating
instructions. Take into ac-
count the working condi-
tions and the work to be
carried out. Using the power
tool for anything other than its
intended use can lead to dan-
gerous situations.
h) Keep handles and grip
surfaces dry, clean and
free from oil and grease.
Slippery handles and grip sur-
faces do not permit safe opera-
tion and control over the power
tool in unexpected situations.
5) USE AND TREATMENT OF
THIS BATTERY-POWERED
TOOL
a) Only recharge batteries
using chargers recommen-
ded by the manufacturer.
If a charger that has been de-
signed for a particular type of
battery is used to charge other
batteries, there is a risk of fire.
b) Only use batteries that
are intended for the pow-
er tool. The use of other bat-
teries may create a fire hazard
and lead to injury.
c) When not in use, keep
batteries away from pa-
per clips, coins, keys,
nails, screws or other
small metal objects that
could cause the contacts
to be bridged. A short circuit
between battery contacts can
result in burns or a fire.
d) When misused, fluid may
leak from the battery.
Avoid any contact with
it. On accidental contact,
wash in running water. If
the fluid comes into con-
tact with the eyes, seek
medical assistance also.
Leaking battery fluid can cause
skin irritation or burns.
e) Do not use damaged or
altered batteries. Damaged
or altered batteries can be
unpredictable and lead to fire,
explosion or risk of injury.
f) Do not expose batteries
to fire or elevated tempe-
ratures. Fire or temperatures
over 130 °C can cause an ex-
plosion.
g) Follow all instructions for
charging and never char-
ge the battery or the bat-
tery-powered tool outside
the temperature range
stated in the operating in-
structions. Incorrect charging
or charging outside the permit-
ted temperature range may des-
troy the battery and increase
the risk of fire.
GB IE NI
9