Parkside PHA 12 A1 Originalbetriebsanleitung Seite 8

GB IE NI
while carrying it, or having the
power tool switched on when
connecting it to the power sup-
ply can cause accidents.
d) Remove adjustment tools
or spanners away from
the area before switching
on the power tool. A tool
or key located in a rotating
piece of equipment can lead to
injuries.
e) Avoid an abnormal body
posture. Ensure that your
footing is secure and
keep your balance at all
times. This will help you to
have better control of the pow-
er tool in unexpected situations.
f) Wear suitable clothing.
Do not wear loose clo-
thing or jewellery. Keep
hair, clothes and gloves
away from moving parts.
Loose clothing, jewellery or
long hair may get caught in
moving parts.
g) If dust extraction and
collection devices can be
installed, make sure that
these are connected and
used correctly. Using a dust
collector can reduce hazards
caused by dust.
h) Do not allow yourself to
be lulled into a false fee-
ling of security and do
not disregard the safety
rules for power tools,
even if you are familiar
with the power tool after
using it many times. Care-
less action can lead to serious
injuries within a fraction of a
second.
8
4) USE AND TREATMENT OF
THE POWER TOOL
a) Do not overload the po-
wer tool. Use the correct
power tool for the job in
hand. With the right power
tool, you can work better and
more safely within the specified
power range.
b) Do not use the power tool
with a damaged cable.
A power tool that no longer
switches on or off is dangerous
and must be repaired.
c) Remove the plug from
the wall socket and/or
remove the rechargeable
battery before you chan-
ge the device's settings,
change accessories or put
away the power tool.These
safety measures prevent acci-
dentally starting the power tool.
d) Store unused power tools
out of reach of children.
Do not allow persons to
use the power tool who
are not familiar with it or
who have not read the
operating instructions.
Power tools can be dangerous
if operated by inexperienced
persons.
e) Look after the power tool
and accessories carefully.
Check that the moving
parts are working proper-
ly and are not becoming
jammed and that parts
are not broken or dama-
ged in such a way that
the functioning of the de-
vice is impaired. Have da-