Kärcher VM R750 Gebrauchsanweisungenhandbuch Seite 90

5 -Adjust the tensioner (A) to extract the
pin (C). Release the tensioner so as to
restore the required tension in the belt.
Important
Before tightening the belt, make sure
that it is correctly positioned in the pul-
ley seats.
GB
ENGINE DISPOSAL
This operation should be carried out by ex-
perienced operators, in compliance with the
legislation in force concerning safety at the
workplace.
Do not throw away non bio-degradable
products and non ferrous components (rub-
ber, PVC, resins, etc.).
English
belt (D)
belt (D)
Warning - Caution
Do not throw away any replaced part in
the environment. Carry out their disposal
in compliance with the relevant legisla-
tion in force.
Important
Before restarting the engine, make sure
there are no tools or other material left
near the moving parts.
belt (D)
pin (C)
hole (B)
While decommissioning the engine, divide
all the components depending on their
chemical composition and dispose of them
accordingly.
- 42 -
Information about component replacement
R750
tensioner (A)
IDM-45300301700.tif