Kärcher VM R750 Gebrauchsanweisungenhandbuch Seite 70

(1)
Frequency
Every
300 hours
(Every 30.000
km)
Every
900 hours
Every
1200 hours
Every
1500 hours
(Every 50.000
km)
Every
4000 hours
Every
8000 hours
(1) If an hour counter is not available, the frequency of the interventions should be calculated on the basis of a calendar
day: one calendar day corresponds to 12 hours of operation.
(2) In severe working conditions, such as dusty environments and operation at extreme loads, the engine oil must be
changed every 150 working hours. If the engine has not been in operation for the length of time indicated, the oil must
still be changed at least once a year.
(3) If the engine has not been in operation for the length of time indicated, the filter must still be changed at least once
every 12 months.
(4) If the engine has not been in operation for the length of time indicated, the fluid must still be changed at least once
every 24 months.
(5) If the engine has not been in operation for the length of time indicated, the belt must still be changed at least once
every 24 months
GB
English
Component Type of intervention
(3)
Fuel filter Replace
Drive belt (type
Replace
(5)
Poly-V)
(4)
Coolant Replace
Antiparticulate filter Clean
Performing partial
Engine
overhaul
Performing general
Engine
overhaul
Intervention procedures
Apply to an authorised
workshop
Apply to an authorised
workshop
- 22 -
R750
Reference
See "Fuel filter
replacement"
See "Belt replace-
ment (type Poly-V)"
See "Coolant
replacement"
See "Cleaning the
antiparticulate filter"
Maintenance information