Kärcher VM R750 Gebrauchsanweisungenhandbuch Seite 57

Modèle
Specific fuel consumption
Specific oil consumption
Type of injection
Type of fuel
Fuel supply
Injector supply
Type of lubrication
Circuit fuel supply
Oil change including filter
(standard sump)
Oil quantity at minimum level
(standard sump)
Oil quantity at maximum level
(standard sump)
Oil pressure at minimum speed
(with started engine)
Oil cooling
Total capacity of cooling circuit
(excluding radiator and relevant pipes)
Setting pressure of the expansion tank plug
Coolant
Coolant maximum temperature alarm
Nominal voltage
Alternating current generator (nominal voltage)
Alternating current generator (nominal current)
Starter motor output
Recommended battery capacity
Battery breakaway current
Maximum depression allowed with new air filter
English
CONSUMPTION AT MAXIMUM POWER
g/kWh
g/CVh
FUEL SUPPLY CIRCUIT
The engine has been designed to be powered by standard fuels
available on the European market (according to specifications
DIN EN 590). If it is to be powered by BIODIESEL fuels (accor-
ding to specifications UNI EN 14214), it can be mixed, up to 5%,
with fuel available on the European market (according to regula-
tion DIN EN 590). For engines model R754EU4 - R756EU4, use
fuel with a low sulphur content. The percentage sulphur must
LUBRICATION CIRCUIT
litres (kg)
litres (kg)
litres (kg)
bar
COOLING CIRCUIT
litres
bar
Demineralised cold water 50% + Antioxidant and anti-freeze fluid
50% (Inhibited glycol ethylene in compliance with ASTM D 3306)
°C
ELECTRIC SYSTEM
V
V
A
kW
Ah
A
SUCTION CIRCUIT
mbar
- 9 -
R754 EU4
274
0,3
Common Rail direct injection
never exceed 10-50 ppm (parts per million).
Important
Do not use fuels with specifications other than
those indicated
Gear pump
High pressure injection pump
Forced lubrication
Rotor pump
7,8 (6.8)
6,6 (5.8)
7,4 (6.4)
1 - 1.5
Oil/water cooler
5
1 ± 0.1
107
12
14
105
2,3
90
400
70
R750
R756 EU4
254
0,3
9,4 (8.3)
7,5 (6.6)
8,4 (7.4)
1 - 1.5
7.5
GB
1 ± 0.1
107
12
14
105
2,3
90
400
70
Technical information