Kärcher VM R750 Gebrauchsanweisungenhandbuch Seite 83

FUEL FILTER REPLACEMENT
Follow the procedure below.
1- Turn off the engine and remove
the ignition key.
2 - Let the engine cool down ade-
quately to avoid being burnt.
3 - Prepare a container to collect
any leak.
4 - Disassemble filter (Z) and re-
place it.
5 - Fill the new filter with fuel from
the filter you have just removed.
6 - Lubricate the gasket of the new
filter before mounting it.
7 - Refit the filter.
8 - Bleed air from the fuel supply circuit
(see "Fuel supply circuit bleeding").
9 - Turn the engine on and check for any
fuel leaks.
Warning - Caution
If any fuel leaks are found, stop the en-
gine immediately and contact an author-
ised service centre.
Important
Do not throw away any polluting material
in the environment. Carry out their dis-
posal in compliance with the relevant
legislation in force.
English
- 35 -
R750
fuel filter (Z)
IDM-45300601600.tif
Maintenance information
GB