Kärcher VM R750 Gebrauchsanweisungenhandbuch Seite 78

ENGINE OIL LEVEL CONTROL
Follow the procedure below.
1- Start the engine and bring it to
the operating
(70÷80 °C).
2 - Turn off the engine and remove
the ignition key.
3 - Place the engine on a perfectly
level surface.
4 - Wait a few minutes so that all the
oil will flow into the sump.
5 - Remove the dipstick (L) and
check the oil level.
6 - Top up, if necessary, from plug
(M). As for the oil quantity, see
"Specifications".
Important
The oil level should be included
between the minimum and maxi-
mum marks. Do not mix oils of dif-
ferent brands or with different
features (see "Recommended lu-
bricants").
ENGINE COOLANT LEVEL CHECK
Follow the procedure below.
GB
1- Start the engine and bring it to
the operating
(70÷80 °C).
2 - Turn off the engine and remove
the ignition key.
3 - Let the engine cool down proper-
ly.
4 - Unscrew the filler plug (P).
Warning - Caution
Open the plug gently to drain the
pressure.
English
temperature
temperature
- 30 -
load plug (M)
dipstick (L)
load plug (P)
R750
IDM-45300601000.tif
IDM-45300601100.tif
Maintenance information