Astralpool Smart+ 60 Einbau- Und Betriebsanleitung Seite 3

3. SAFETY WARNINGS AND RECOMMENDATIONS: ______________________________________________________________________
•
The equipment should be assembled and handled by truly qualified people.
•
Current electrical and accident prevention regulations should be followed.
•
Under no circumstances will the manufacturer be held responsible for the assembly, installation or start-up, nor any handling or fitting
of components unless they are carried out on its premises.
•
The AstralPool Chlore Salt Electrolysis Systems (42350, 42351, 42352) operate at 230VAC, 50Hz. Do not attempt to alter the system
to operate at a different voltage.
•
Check all the electrical connectors are well tightened to avoid false contacts and their consequent overheating.
•
Before installing or replacing any component, disconnect the equipment from the mains, and use exclusively spare parts supplied by
AstralPool.
•
Taking into account the fact that the equipment produces heat, it must be installed in places with sufficient ventilation. Fan openings
should be kept free of any element that could obstruct then. The equipment should not be installed near flammable materials.
The AstralPool Chlore Salt Electrolysis Systems (42350, 42351, 42352) have a protection degree of IP24. They should never be
installed in places susceptible to flooding.
If the electrolysis equipment has no cover detection system, it is important to reduce its production to the minimum while the pool is
covered. Otherwise, an excess of chlorine could degrade the pool materials.
2