YASKAWA GA500 Serie Installations- Und Bedienungansleitung Seite 25

No.
Name
(Hex.)
d2-02 Frequency Reference
Lower Limit
E1-01 Input AC Supply
Voltage
E1-04 Maximum Output
Frequency
E1-05 Maximum Output
Voltage
E1-06 Base Frequency
E1-09 Minimum Output
Frequency
E2-01 Motor Rated Current
E2-11 Motor Rated Power
H1-01 - H1- Terminal S1 to S7
07 Function Selection
H2-01 Term MA/MB-MC
Function Selection
H2-02 Term P1-C1 Function
Selection
H2-03 Term P2-C2 Function
Selection
H3-01 Terminal A1 Signal
Level Select
H3-02 Terminal A1 Function
Selection
H3-03 Terminal A1 Gain
Setting
RUN
H3-04 Terminal A1 Bias
Setting
RUN
H3-09 Terminal A2 Signal
Level Select
H3-10 Terminal A2 Function
Selection
H3-11 Terminal A2 Gain
Setting
RUN
H3-12 Terminal A2 Bias
Setting
RUN
H3-13 Analog Input
FilterTime Constant
YASKAWA TOMPC71061753A YASKAWA AC Drive GA500 Installation and Operation Instruction
Sets minimum limit for all frequency references. The maximum output
frequency is 100%.
Sets the drive input voltage.
Sets the maximum output frequency for the V/f pattern.
Sets the maximum output voltage for the V/f pattern.
Sets the base frequency for the V/f pattern.
Sets the minimum output frequency for the V/f pattern.
Sets the motor rated current in amps.
Sets the motor rated output in the units from o1-58 [Motor Power Unit
Selection].
Sets functions for MFDI terminals S1 to S7.
Sets a function for MFDO terminal MA-MC or MB-MC.
Sets a function for MFDO terminal P1-C1.
Sets a function for MFDO terminal P2-C2.
Sets the input signal level for MFAI terminal A1.
0: 0 to 10V (Lower Limit at 0), 1: 0 V to 10 V (Without Lower Limit)
Sets a function for MFAI terminal A1.
Sets the gain of the analog signal input to MFAI terminal A1.
Sets the bias of the analog signal input to MFAI terminal A1.
Sets the input signal level for MFAI terminal A2.
0: 0-10V (LowLim=0), 1: 0 V to 10 V (Without Lower Limit), 2: 4 to 20 mA,
3: 0 to 20 mA
Sets a function for MFAI terminal A2.
Sets the gain of the analog signal input to MFAI terminal A2.
Sets the bias of the analog signal input to MFAI terminal A2.
Sets the time constant to apply a primary delay filter to the MFAI terminal.
Description
1 English
25