Technical Data; Notes On Safety; Symbols; Symbols In The Manual - Parkside PMFS 200 B2 Originalbetriebsanleitung

GB MT

Technical Data

3-in-1 multi-purpose sander ..... PMFS 200 B2
Rated input voltage (U)
Power input (P) .............................200 W
Idling speed (n ) ...........7000-12000 min
0
Oscillation rate (n) ......14000-24000 min
Weight (without sander and
dust collect box) ..........................1.38 kg
Protection class .................................
Protection category
Sound pressure level
(L ) ......................79 dB(A); K
pA
Sound power level
(L ) .................... 90 dB(A); K
WA
Vibration
(a ) ................ 13.4 m/s
h
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
38
......230 V~, 50 Hz
...........................IP20
= 3 dB
pA
= 3 dB
WA
; K = 1.5 m/s
2
h
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
-1
ing the user should be based on
-1
estimated exposure under actual
usage conditions (all parts of the
II operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Notes on Safety

2
This section details the basic safety instruc-
tions for working with the appliance.

Symbols

Symbols in the manual:

Warning symbols with in-
formation on damage and
injury prevention.
Instruction symbols (the instruction
is explained at the place of the ex-
clamation mark) with information on
preventing damage.
Help symbols with information on
improving tool handling.