Disposal; Packaging; Trouble-Shooting - Silvercrest SSMZ 300 B2 Bedienungsanleitung

12. Disposal

This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances.
This recycling symbol marks
e.g. an object or parts of the
material as valuable for recy-
cling. Recycling helps to re-
duce the consumption of raw
materials and protect the environment.

Packaging

When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.

13. Trouble-shooting

If your device fails to function as required,
please try this checklist first. Perhaps there is
only a minor problem, and you can solve it
yourself.
DANGER! Risk of electric
shock!
Do not attempt to repair the device your-
self under any circumstances.
Fault
• Has the device been
• Check the connection.
• Has the overheating
No function
• Smoothie maker: Has
Smoothie • Switch off immediately!
maker:
Blade of the
blade attach-
ment 13 not
turning or turn-
ing only with
difficulty
Citrus press: • Did you apply exces-
Juicer
cone 11/
11+12 stops • Is there a foreign object
turning
Citrus press: • Is the drip stopper
The juice does
not flow out of
the outflow 2.
Possible causes /
Action
connected to the pow-
er supply?
protection switched off
the device? (see
"Overheating protec-
tion" on page 11)
the beaker 14/16
been inserted properly?
Pull out mains plug 4
and check:
Blockage in the beak-
er 14/16?
sive pressure to the juic-
er cone 11/11+12?
in the device?
closed? Gently press
the outflow 2 down-
wards.
GB
13