Plg150-Ap Structure - Yamaha PLG150-AP Bedienungsanleitung

PLG150-AP Structure

The following illustration shows the structure of PLG150-AP.
PLG150-AP
Voice
Voice
Voice
Voice
Tone Generator of
Plug-in Board block
Element 8
Element 7
Element 6
Synthesizer or Tone Gener-
ator to which the PLG150-
AP has been installed
Tone
Generator
Insertion Effect bypass is
ON (MSPS-compatible
devices only)
For Modular Synthesis Plug-in System Users
NOTE
• When the Insertion effect of the mother device is bypassed, the Voice Reverb and Voice Chorus of the
PLG150-AP are also bypassed simultaneously. However, when your mother device has an effect bypass
on/off parameter (e.g., "PLG-EF" parameter), set the function to on. If the parameter is off, the effect of
PLG150-AP will not be bypassed.
• The Voice Insertion and Voice EQ of the PLG150-AP cannot be bypassed.
Insertion Effect
bypass is OFF
(MSPS-compatible
devices only)
Element 1
PLG150-AP
Insertion Effect bypass is
OFF (MSPS-compatible
devices only)
To change the overall settings for the PLG150-AP, edit the AP
Native System Parameters from the synthesizer or tone genera-
tor to which the PLG150-AP has been installed (page 19).
Insertion Effect bypass is
ON (MSPS-compatible
devices only)
Voice
Insertion
Voice
Reverb
Voice
Chorus
To the synthesizer or tone generator to which
the PLG150-AP has been installed.
To change the effect of each Voice, edit the AP Native Part
Parameters from the synthesizer or tone generator to which
the PLG150-AP has been installed (page 17).
Insertion
Reverb
Effect
Chorus
Master Effect
Master EQ
Voice EQ
(2-Band)
Audio Out
etc.
PLG150-AP Owner's Manual
9