Selecting/Editing The Ap System Parameters (Modular Synthesis Plug-In System) - Yamaha PLG150-AP Bedienungsanleitung

Selecting/Editing the AP System Parameters
The parameters that apply to the entire system of the PLG150-AP are called AP native system
parameters (page 19).
The parameters are included in the Utility mode of the MSPS-compatible device to which the
PLG150-AP has been installed.
1
Press the UTILITY button.
The Utility Mode display appears.
2
Press the [F6] (PLUG) button.
3
Press any of the [SF3] – [SF5] (NATIVE1 – NATIVE3) buttons correspond-
ing to the slot to which the PLG150-AP has been installed.
4
Adjust the value or change the setting for the selected parameter.
Use the [INC/YES] and [DEC/NO] buttons or the data dial.
12
PLG150-AP Owner's Manual
(Modular Synthesis Plug-in System)