Selecting Ap Voices (Xg Plug-In System) - Yamaha PLG150-AP Bedienungsanleitung

Selecting AP Voices
The PLG150-AP voices can be selected just like the voices of the XG tone generator. Keep in mind,
though, that they can only be selected when the Sound Module Mode is set to XG or Performance.
Also, the Part Assign parameter in the Utility mode (see below) must be set to the desired Part.
• The example displays used in the following explanations are all taken from the MU128.
NOTE
Enabling and Selecting AP Voices
1
Set the Sound Module Mode to "XG" or "PFM" (Performance).
Press the [MODE] button and use the [SELECT </>] buttons.
2
Set the Part Assign parameter to the desired Part number.
To do this:
1) Press the [UTIL] button.
2) Select the "PLUGIN" menu (with the [SELECT >] button) and press [ENTER].
3) Select the "PLG150-AP" menu if necessary (with the [SELECT </>] buttons), and press
[ENTER]. The Part Assign menu appears.
4) Use the [VALUE -/+] buttons or dial to change the Part number.
The Part Assign range for the XG mode is 1 – 16 and "off"; for the Performance mode, it is 1 – 4
and "off."
Press the [EXIT] button to return to the Play mode.
(XG Plug-in System)
PLG150-AP Owner's Manual
13