Ap System Parameters - Yamaha PLG150-AP Bedienungsanleitung

AP System Parameters

Part Assign
Settings: 01 – 16, off
This determines the Part to which the PLG150-AP voice is assigned. If a Part is not properly assigned here, none
of the PLG150-AP voices can be selected for the Part. (This applies to XG Plug-in System compatible "mother"
devices.)
NOTE
VelCurve (Velocity Curve)
Settings: Normal, Soft1, Soft2, Soft3, Hard1, Hard2, Cross1, Cross2
This function lets you set how the volume of the PLG150-AP's Voices respond to your playing touch (velocity). Eight
different Velocity Curve settings (or curves) are available, letting you tailor the response to your own preference.
The Normal setting provides standard touch response.
Soft 1 to 3 allow you to produce a reasonably high volume with a
soft, light touch (low velocities).
Hard 1 and 2 produce high volume only with a hard, strong touch
(high velocities).
Cross 1 and 2 are "mirror image" curves, designed to be used
together with different voices in a layer to produce a velocity
crossfade effect. As shown in the illustration, the two curves
complement each other in a way that allows the Cross 2 applied
voice to sound at soft velocities, while the Cross 1 voice sounds
at high velocities.
(PLG150-AP NATIVE SYSTEM (page 29))
• The PLG150-AP voices can only be assigned to a single Part.
Parameters
PLG150-AP Owner's Manual
19